Ripped the door knob off the door to access the eaves. Thought about buying a replacement but then I realised I had #freecad and a #3dprinter

Retro Floppy Disk SD Cards Organizer – Holds 10 Cards • 3MF files
Download 3D print model: https://cults3d.com/:3307920
Designed by 3DPrintingForAll
#3DPrinting #3DPrinter #Printable #STLfile

Oooo! A writeup from hackster.io on the #RepRapMicron #3Dprinter :)
https://www-hackster-io.cdn.ampproject.org/c/s/www.hackster.io/news/can-reprap-revolutionize-3d-printing-again-with-the-new-micron-design-18c4775e4d1a.amp

#lazyweb Hunting for an #ESP32 #CNC or #3Dprinter controller board, preferably Open Hardware but not essential, that is actually in stock.

Trying to #FluidNC and failing like a champ.

Nintendo NES Deck Box • STL and 3MF files
Download 3D print model: https://cults3d.com/:3269527
Designed by NightmareArtifacts
#3DPrinting #3DPrinter #Printable #STLfile

Adorbs Micro 3D Printer is adorbs.

https://www.youtube.com/watch?v=jl1jFIWfpUg

PC case mini ITX & micro ATX design by Makeyo • 3D files
Download 3D print model: https://cults3d.com/:2949721
Designed by MAKEYO
#3DPrinting #3DPrinter #Printable #STLfile

DICE ROCKET | 6-SIDED ROCKET-SHAPED DICE • 3D files
Download 3D print model: https://cults3d.com/:3240159
Designed by AF_Inventions
#3DPrinting #3DPrinter #Printable #STLfile

So, I've been getting reasonably decent with #OpenSCAD. I've debated opening an Etsy store, but I don't own a #3DPrinter. While I do have access to a couple for personal projects, I have nothing that would be suitable for commercial use, nor do I have the seed money to buy one.

One of the services I'm thinking of offering in the interim is creating custom STL files for people based on a rough sketch or photo, but I don't know if that would be a viable thing.

Is that a thing anyone here would have interest in?

I have spent the last six hours trying to get NinjaFlex 85A TPU to print in my Prusa CORE One #3DPrinter .

I think I am at the point I have to accept that it won't print and take the loss on the NinjaFlex that I bought, as well as the loss on the other pieces I printed for a bird feeder that needed a flexible part to hold the peanuts.

This is what is called "Taking the L."

CAPYBARA, FLEXI, ARTICULATED • STL and 3MF files
Download 3D print model: https://cults3d.com/:3199914
Designed by rogistudios
#3DPrinting #3DPrinter #Printable #STLfile

FTR (For The Record), I agree. If you have a #Bambulab #A1Mini #3DPrinter and limited space, this is a must-have upgrade. I am impressed. This should be added to the standard delivery when you order the A1 Mini without AMS. https://makerworld.com/en/models/1401662-a1-mini-compact-spool-holder-v3-handle#profileId-1453726

#3DPrinter Problems, #BambuLab

The print head of my #X1Carbon has recently started banging hard against the back wall (or rather, against the folded metal sheet at the back wall) .
Cleaning the carbon axles and recalibrating the printer didn't help in the search for the cause, nor did the internet.

Until the epiphany came
I recently carried out a skew correction and, as recommended by Bambu Lab, inserted the measured values into the machine's G-code:
M1005 X150.05 Y149.65 ; Skew correction
M500 ; save the values permanently

The solution to the puzzle:

The X value is greater than the Y value for the entered skew correction., i.e. Y movements are corrected upwards - ergo the distance that the print head travels from the front left corner (reference) to the position near the filament cleaner (very close to the rear wall) increases -> leads to impacts against the wall / bended metal sheet because the print head wants to travel further than it can.

Changing the G-Code to
M1005 X150 Y150
M500
and the "head bang" problem was gone.
No problem if the Y-value for skew correction is bigger than the X-value, but do not do a skew correction if X > Y !!!

Maybe it will help someone.

@3dprinting

One of the things I thought a #3dPrinter would be good for was printing a replacement piece for a marmot tent that I have. Turns out I also needed to figure out #3dModeling to generate the file.

About to make my fifth revision to the broken piece I have, but it seems like this might be the final revision for me, aka "Good Enough".

And now I"m considering setting up a #manyfold server as a model repository.

"Ohnezahn" aus "Drachen zähmen leicht gemacht"

#3D-Drucker #3dprinter #3dprinted #3D-Druck #3dpriniting

Will watch soon:
#3dprinter #mac #classic
https://youtu.be/IjdqEpYkrAI